Piyush steel is the known fabricator of a qualitative range of ASTM B637 Inconel X-750 Round Bars. These bars are very well known for their resistance ability in adverse conditions. These bars are offered by us in standard dimensions, sizes, specifications, standards, and designations. Because of its prominent attributes, its demand is high in the market. Thus, we store them in bulk quantities so as to fulfill the urgent requirements of the customers.
Table Of Content
ASTM B637 Inconel X-750 (UNS N07750) is a precipitation hardenable chromium and nickel alloy used for its oxidation and corrosion resistance property. it has high strength up to 1300 deg F. however, it has many effects of precipitation hardening with an increase in temperature over 1300 deg F. the heat treated alloy has useful strength up to 1800 deg F. it has excellent properties down in the cryogenic temperatures. The economics of alloy X-750 is joined with its availability in all standard forms that result in the application of a wide variety of industrial sectors.
This alloy is used from the sub zero temperature to 1200 deg F. the heat treatment operation is employed depending on the application and properties required. For service above 1100 deg F, particularly loads are sustained for long times. Optimum properties are attained by performing solution treatment at 2100 deg F. also stabilization treatment and precipitation treating are performed in the temperature up to 1550 deg F and 1300 deg F respectively. For application at down temperatures, this alloy may be strengthened by precipitation hardening operation after cold and hot working also by equalizing and solution treating. The furnace cooling treatment is also used to develop optimum properties for industrial applications. After performing heat treatment operation properties are created under the section on mechanical properties.
Properties of ASTM B637 Inconel X-750 Round Bars:
These bars have excellent resistivity in terms of corrosive environments. Because of high heating properties, these bars have the ability to withstand in the higher temperatures without any deformation and elongation. These have a great tendency to survive in the chemical reducing zones without any further loss of properties. It serves good performance even in the exposure of organic and inorganic compounds. It has good resistance ability to local and general corrosion even in the fluctuating environments.
These bars have great properties of formability, machinability, fabricability. Thus these bars easily can be changed to complex designs. Due to its weldability feature, it is weldable with all standard welding operations. It requires standard machining speeds and feeds that reduce its machining cost.
Quality at our end:
Quality assurance at Piyush steel starts with understanding our client's requirements. Our quality process is well defined and implemented thoroughly in each level of production. Our all range of products built under the national and international standard of quality to fulfill customer requirements. By enhancing the effectiveness of machines and equipment we are aiming towards zero defected products. We also believe in continuous improvement of products reliability. This is done by performing tests on a manufactured range of products.
• Crushing test
• Compression test
• Buckling test
• Thermal stability analysis
• Mechanical test
• Hardness test
• Pitting corrosion test
• Chemical test
• Intergranular corrosion test
• Ultrasonic test
• Radiographic test
• Positive material test
• National board approval lab (NBAL) test report
• Specification guide
• Quality assurance plan
• Fumigation certificates
• Mill test report
• Heat treatment charts
• MTC report
• Commercial invoice
ASTM B637 Inconel 2.4669 Round Bars are supplied in the industrial prominent packaging. These are supplied in the form of bundles with individual wrap.
|Inconel X-750||2.4669||N07750||NCF X-750|
Specification : EN, DIN, JIS, ASTM, BS, ASME, AISI
Standard Specification : ASTM B637 / ASME SB637
Size : 5 mm To 500 mm
Diameter : 0.1 mm to 100 mm
Length : 100 mm To 3000 mm Long & Abov
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
|Inconel X-750||70.0 min||14.0 - 17.0||0.40 - 1.0||.08 max||1.00 max||2.25 - 2.75||0.50 max||.50 max||.01 max|
|Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|Inconel X-750||1430°C||1267 MPa||868 MPa||25 %|
The full identification of the bars should be continuously marked down its whole length, including :
inconel b637 x-750 round bar manufacturers in india, astm b637 x-750 inconel high tensile steel round bar, inconel x-750 seamless round bar, inconel astm b637 x-750 round bar supplier in india, astm b637 x-750 inconel triangle bar, inconel astm b637 x-750 round bars supplier, price of astm b637 inconel round bar, asme sb637 x-750 round bar, inconel x-750 round bar suppliers in chennai, x-750 bar supplier, astm b637 x-750 inconel round bar supplier in mumbai, inconel astm b637 x-750 threaded bar, x-750 inconel cold drawn round bar, astm b637 x-750 inconel round bar manufacturers in india, inconel x-750 bars supplier, b637 x-750 inconel round bar price, astm b637 x-750 inconel round bar manufacturer in mumbai, inconel astm b637 x-750 black bar, a166 x-750 inconel rods supplier, inconel astm b637 x-750 half round bar, inconel x-750 round bar manufacturer, astm b637 x-750 inconel round bar price list, astm b637 x-750 inconel round bar price, inconel astm b637 inconel x-750 bars price list, inconel astm b637 x-750 round bar manufacturer in mumbai, inconel astm b637 x-750 rods supplier in india, astm b637 x-750 inconel bars supplier, astm b637 x-750 inconel bars price list, astm b637 x-750 inconel round bar suppliers, astm b637 x-750 inconel bars price list in india.